Universal 12kg Adjustable Tv Wall Mount Bracket Flat Panel Frame Support 30 Degrees with Small Wrench for 14-32 Inch

Specification:Type: AdjustableApplicable size: 14-32 Material: cold rolled boardDistance from wall: 60-170MM / 2.3622 Maximum capacity: 12KG / 26.46LBTilt angle up and down: 30 degreesVESA standard pitch: 50mm x 50mm, 75mm x 75mm, 100mm x 100mm, 200mm x 200mmTilting angle left and right: 180 degreesColour: Blackfeature:Automatic telescopic adjustment design, telescopic and rotatable.The key parts are thickened, the structure is stable, and the ability to bear weight is strong.The high-strength rotating shaft can withstand multiple rotations without deformation.The safety screw design ensures no deviation under load.Suitable for most HDTV flat-panel TVs, LCD TVs, LED TVs, plasma TVs.Installation and instructions:1. Using the wallboard as a template, drill four holes with a diameter of 10mm and a depth of 50mm in the concrete wall. Then four plastic concrete anchors are wedged into the holes.2. Install the wall panel, put the wall panel the wall, and then screw the four square bolts into each plastic concrete anchor bolt through metal washers, so that the four square bolts, the plastic concrete anchor bolt and the wall are fixed .3. Install the monitor bracket to the back of the flat-screen TV: Screw the four bolts into the holes the back of the flat-screen TV, make sure that the distance between each bracket and the top of the flat-screen TV is equal and centered as much as possible. The parts should be selected according to the size of the holes the back of the flat-screen TV.4. Adjust the angle of the LCD to a suitable position between -5°~+15° by hand.notes:-When purchasing, please check that the hole distance of the TV is the same as the product, and the weight is within the tolerance range of the product.-The number of product accessories will vary, but it will not affect installation and use.Package Included1 x TV wall bracket1 x set of installation accessories

• Automatic telescopic adjustment design, telescopic and rotatable.
• The key parts are thickened, the structure is stable, and the ability to bear weight is strong.
• The high-strength rotating shaft can withstand multiple rotations without deformation.
• The safety screw design ensures no deviation under load.
• Suitable for most HDTV flat-panel TVs, LCD TVs, LED TVs, plasma TVs.