Electric Wall Grooving Cutting Machine Chaser, 110V 4000W Wall Chaser Concrete Cutter w/5Pcs Saw Blades & Water Pump, Toolbox, Handheld Slotting Machine for Concrete, Floor, Wall Brick, Marble

SpecificationsStyle: ModernColor: Green, Black, SilverMaterial: Plastic, Aluminum, Copper, IronSurface Treatment: Spraying PaintingPlug Standard: US StandardMount Type: HandheldAssembly Required: YesPower Source: Corded ElectricVoltage: 110V, 50-60HZLoad Power: 4000WNo-load Speed: 6500RPMGrooving Angle: 360°Saw Blade Diameter: 12.1cm/ 4.76 inGrooving Depth Adjustment: 30mm/1.18inchGrooving Width Adjustment: 30mm/1.18inchLength of Water Pipe: 4m/ 13.12 ftPower Cord Length: 3 m/ 9.84 ft, 1.5m/4.92 ft (Water Pump)Product Length: 48cm/18.89 inHandle Width: 4cm/ 1.57 inHead Shell Length: 16cm/ 6.3 inToolbox Size: 55*18*29cm/21.65*7.08*11.42inWater Pump Max. Flow Rate: 4L/0.88gal/ minWater Pump Rated Power: 30WWater Pump DC Input: 12V 2AWater Pump Max. Head: 10m/32.81 ftGross Weight: 8.2kg/ 18.08 lbs Package Size: 32*60*30cm/12.6*23.62*11.81 in Package Included1* Grooving Machine 1* Toolbox5* Saw Blades1* Water Pump1* Water Pipe1* English ManualOther Accessories for AssemblyNotes1.Please read the instruction manual carefully before use and pay attention to the safety matters therein.2.Please note that when using a vacuum cleaner (not included), the front protective cover should be fully pressed against the wall/floor when the base plate is set to the bottom position.3.Please note that in order to prolong the service life, please check the wear of carbon brushes regularly. When the spark is large, the carbon brushes need to be replaced promptly.4.Please note that when cleaning the cutting head, water should be avoided from entering the machine body through the vent, which may affect the service life of the machine.5.Please note that when the rotating speed of the machine body slows down during use, do not use brute force to operate it hard to avoid overloading and burning the machine, first lift the machine and idle it for 5-30 seconds.6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order."

• Electric Wall Grooving Cutting Machine Chaser: The product is made of high-quality plastic, aluminum, copper, and iron, using spraying painting technology, with high strength, and wear resistance, ensuring your long-term use.
• High Efficiency: With an all-copper motor with 4000W load power, 6500RPM no-load speed, and a sharp diamond blade, it allows you to complete grooving jobs easily and efficiently.
• Dust-free Grooving: This product can be connected to a pump and a vacuum cleaner (not included) and both can be used at the same time to reduce dust during grooving, reduce environmental pollution, and safeguard the health of the operator. The front guard also helps to reduce dust splashing.
• Precise Control: You can adjust the grooving depth ( 0-1.18 inches) by adjusting the base plate and adjust the grooving width (0-1.18 inches) by changing the number of saw blades to meet the needs of different specifications of wire pipe laying, ensuring the consistency and accuracy of the grooving size.
• Widely Used: This product can be applied to concrete grooving, floor grooving, red brick grooving, cutting off rebar, marble grooving, and so on. It is widely used on construction sites, home decoration, road renovation, and cement factories."